K-Cell Single Cut LED Strip

Ansell Lighting offer LED Strip for commercial and industrial use which can be controlled via Casambi and for residential use via WiZ with the installation of a controller.

As the distance increases away from the driver, the amount of light produced reduces by the stated factor and where the maximum length is exceeded, the LED Strip will at that point will appear visibly somewhat dimmer, however it will still continue to operate.

There is a maximum length stated for LED Strip and this will be dependent upon the characteristics of each different Strip. Basically, this is a low voltage DC circuit, where the amount of light produced by the individual LED’s is dependent upon receiving the specified forward current by way of the appropriate voltage, and this diminishes as the distance away from the Driver end of the strip increases. All LED Strips are quoted with details of the voltage drop over length.

For many types of LED Strip, making a corner joint will require cutting and either reconnecting with connectors or in soldering the joints, however, the Ansell Z-Cell is an LED Strip which can bend around corners without connectors or accessories, thereby maintaining the continuity of the LED Strip across its length.

All LED Strip is marked with the appropriate cut points and the strip should only be cut at those marked points displayed on the Strip itself. As LED Strip is basically constructed from a number of circuits in series, which are then installed in parallel, cutting at any other point will result in the last circuit not being fully connected and therefore will not operate in producing illumination.

When using IP20 rated strip, this is possible with using the supplied connectors, however for IP65 and IP67 rated strip, the installer will be required to solder joints, in order to maintain ingress protection.

Both the catalogue and the website provide a detailed list of the differences between 24Volt and 48Volt Drivers, of both Non-dimmable and Dimmable, as well as for Indoor and/or Outdoor.

A main benefit is in the opportunity of having a cutting point at every 5.55mm for 5W versions and 8.33mm for 14W versions of linear length, allowing great precision of matching the length of the LED Strip to the exact requirements of the installation. With a high CRI in excess of 90, makes this is an ideal solution for retail, where different sized shelving and bespoke features may require precision in the length of LED Strip, so as to prevent dark areas, for example in the feature shelving within a retail shop.

The K-Cell strip offers an ideal solution for the high-end domestic installation, as well as a wide range of hospitality environments, such as hotels and restaurants. It also provides an ideal answer for a wide range of retail environments, where it can offer a real opportunity for the illumination of different sized shelving alongside that of the bespoke shop fit-out. Other applications are those requiring either fixed or moveable display lighting as well as for companies involved in the manufacture of furniture, as well as for step edge lighting.

The K-Cell LED Strip offers small cutting points to allow lengths of LED strip to be installed 'right to the end', thereby achieving an accurate and professional output, where the LED strip becomes an integral part of the installation, either for display purposes or the main light source.

Declarations of Conformity are available on request, please contact our Technical Department (technical@anselluk.com)