Pi Wall/Ceiling

Downlights

Modern surface mounted, die-cast aluminium, non-dimmable, IP65 ultra-slim wall/ceiling light in white or graphite paint finish, with push fit loop-in loop-out terminals for easy install, and screwless front cover. CCT selectable 3000K and 4000K. Ideal for residential and hospitality.

Where to buy Got a question?

Options

Specification

Input

220-240V

Hertz

50/60Hz

Temp

-20°C - 25°C

CRI

SDCM

Beam Angle

115

Class

IP Rating

IP65

IK Rating

IK06

Features

Modern surface mounted ultra-slim wall/ceiling light suitable for residential and hospitality applications
Die-cast aluminium construction with choice of white or graphite paint finish
Push fit loop-in loop-out terminals for ease of installation
Anti-glare toughened tempered opal glass front diffuser
CCT selectable between 3000K and 4000K
Screwless front cover with concealed allen key access provides security and a sleek design
Non-dimmable

Variants

FAQ

: Declarations of Conformity are available on request, please contact our Technical Department (technical@anselluk.com)
: Light sources all have a colour temperature which will dictate whether the light emitted is either of a warm colour, an intermediate or neutral colour, a cool colour or a cold colour. The higher the colour temperature, the cooler, the colour appearance of the light source. The Colour Temperature is a description of the warmth or coolness of a light source. It is most simply, a method of demonstrating the colour characteristics of light, usually either as warm (yellowish) colour or a cool (bluish) colour.

Read more in our blog.
: The beam angle is the point at which the light output Lumens drop below 50% of the total light output. LED beam angles typically vary between 10° - 120°. The beam angle is the area where the light is at its most intense.
: All light sources degrade over time. LM80 is the method for measuring how much lumen depreciation the light source will suffer. This is not to be confused with an estimation of life. LED's typically do not fail as they have no filament to burn to end their life, rather degrade beyond useful life output.